Zhangjiagang Guangda Special Material Co., Ltd.
Leading manufacturer of advanced materials and products for high-end equipment
Add to Cart
Forged Flat Bar 18CrNiMo7-6 High Performance Alloy Steel Gear Steel
18CrNiMo7-6 is a case hardening steel with high toughness. There are a number of variants with high cleanliness requirements. All variants possess tighter composition ranges compared to the standard. One variant is produced with the quality class IQ (isotropic quality). This ensures a very low number of elongated sulphide inclusions which will give more isotropic properties. The high oxidic cleanliness will enable the steel to meet the same high cleanliness demands as for re-melted qualities.
Forged Flat bar 18CrNiMo7-6 Product features
| Material | 18CrNiMo7-6,Din1.6587 17CrNiMo7-6 |
| Type | Forged |
| Diameter | φ150-1500mm |
| Length | Max 10000mm (10m) |
| Surface | Black, peeled, polishing, bright, sand blast, etc. |
| Application | Transmission gear, wind power gear ,Heavy Duty Bushings and Bearings, Cam Followers, Clutch Dogs, Compressor Bolts, Extractors, Fan Shafts, Heavy Duty Gears, Pump Shafts, Sprockets, Tappets, Wear Pins, Wire Guides etc.. |
Forged Flat bar 18CrNiMo7-6 Chemical Compostion
| Standard | Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| EN 10084 | 18CrNiMo7-6 | 0.15-0.21 | ≤ 0.4 | 0.50-0.90 | ≤ 0.025 | ≤ 0.035 | 1.4-1.7 | 1.5-1.8 | 0.25-0.35 |
| 1.6587 |
Forged Flat bar 18CrNiMo7-6 Mechanical properties
Forged Flat bar 18CrNiMo7-6 Equivalent grades
| EN 10084 | Steel No. | ISO 683-11:1987 | Germany | Finland |
| 18CrNiMo7-6 | 1.6587 | 18CrNiMo7 | 17CrNiMo6 | 511 |
Forged Flat bar 18CrNiMo7-6 Heat Treatment
18CrNiMo7-6